Table of Contents
Advertisement
Figure 2. Installation Summary
with Identified Devices
Note: If you use a DishPro compliant splitter, one side of the splitter
blocks the communications between the receiver and the LNBF, but will
allow the satellite TV signals to pass. You will see an Installation
Summary screen similar to the one shown in Figure 3, which will
identify the DP Single LNBF as a "Feed." This is OK because the
satellite signal from the DP Single LNBF is still being received from all
transponders. See the next section regarding operating with a DishPro
compliant splitter.
8
Hide quick links:
Advertisement
Table of Contents
