Table of Contents
Advertisement
Preparation
Turning this unit on/off
Press the power button to turn on this unit.
The power lamp is turned on.
Preparation
Setting date and time
The clock is not set at the time of purchase. Make sure to set the clock.
1
Press the joystick to select the menu. (l 19)
[SETUP] # [CLOCK SET]
2
Move the joystick right or left to select the date to be set, then move the
joystick up or down to select the desired value.
≥ Press the joystick or recording start/stop button to enter the selection.
≥ The year can be set between 2000 and 2039.
3
Move the joystick right or left to select the time to be set, then move the
joystick up or down to select the desired value.
≥ Press the joystick to enter the selection.
4
Press the recording start/stop button to complete the setting.
≥ When the unit is turned on for the first time, a message asking you to set the date and time will
appear. Select [YES] and perform Steps 2 to 3 to set the date and time.
18
SQT0251 (ENG)
To turn off this unit
Hold down the power button until the power
lamp goes off.
Advertisement
Table of Contents
