Apply Factory Settings; Update Software; Check Software Version; Update Software Via Usb - Philips HTL5140B User Manual

Apply factory settings

You can reset this product to the default
settings programmed at the factory.
1
In any source mode, on the remote control
press Volume -, BASS -, and TREBLE - in
sequence within three seconds.
» When the factory settings restore is
complete, the product automatically
switches off and restarts.
EN
12

5 Update software

To get the best features and support, update
your product with the latest software.

Check software version

In HDMI ARC source, on the remote control
press TREBLE -, BASS -, and Volume - in
sequence.

Update software via USB

1
Check the latest software version on
www.philips.com/support.
• Search for your model and click on
"Software and drivers".
2
Download the software into a USB storage
device.
a Unzip the download if zipped, and
make sure that the unzipped file is
named "HTL5140.BIN".
b Put the "HTL5140.BIN" file in the
root directory.
3
Connect the USB storage device to the
(USB) connector on this product.
4
Switch this product to HDMI ARC source.
5
On the remote control, within six seconds
twice then Volume + once, and
press
then hold down SURROUND ON.
» "UPGRADE" (upgrade) blinks on the
display panel.
6
Press to start the upgrade.
» Then "UPGRADE" (upgrade) is
displayed on the display panel.
7
Wait until the upgrade is completed.
» If the upgrade is complete, this product
automatically turns off and on again.