Table of Contents
Advertisement
Quick Links
MODEL: NCA-699
INSTRUCTION MANUAL
IMPORTANT INFORMATION REQUIRED BY THE FCC
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1)this device may not cause harmful interference; and (2) this device must accept
any interference received, including interference that may cause undesirable operation.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation .
This equipment generates.uses and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful interference to radio elevation
reception, which can be determined by turning the equipment off and on. The user is encouraged
to try to correct the interference by one or more of the following measures:
Detachable PLL Electronic Tuning Stereo,
* Reorient or relocate the receiving antenna.
* Increase the separation between the equipment and receiver.
AM/FM Radio MP3/CD Player with ID3 Text Function,
* Connect the equipment into an outlet on a circuit different from that to which the receiver is
USB Input, SD/MMC Card Slot And Aux-in Jack
connected.
* Consult the dealer or an experienced radio/TV technician for help.
Advertisement
Table of Contents
Related Manuals for Naxa NCA-699
Summary of Contents for Naxa NCA-699
-
Page 1: Instruction Manual
MODEL: NCA-699 INSTRUCTION MANUAL IMPORTANT INFORMATION REQUIRED BY THE FCC This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)this device may not cause harmful interference; and (2) this device must accept any interference received, including interference that may cause undesirable operation. - Page 2 Preface Thank you for purchasing this car audio product. Please read this manual carefully before operating this car audio product. Please keep this manual for future use. It will be helpful to you if you are encounter any operational problem. Selecting fine audio equipment is only the start of your musical enjoyment.
-
Page 3: Location And Function Of Controls
LOCATION AND FUNCTION OF CONTROLS 1,2 & 3.SEL(MENU) BUTTON AND VOLUME UP ( + )/ DN ( - ) BUTTONS a) Press the SEL button briefly, it is activated as selecting each mode of E. VOL. -> VOLUME ->BASS ->TREBLE -> BALANCE -> FADER -> When selecting a desired audio mode, press the VOL+ or VOL- button to adjust the audio effect. -
Page 4: Troubleshooting
TROUBLE SHOOTING VOL LAST/VOL DEFA VOL LAST: The radio switches on at the actual volume it had when it was last switched off. Before using the check list please make all the connections first. VOL DEFA: After pressing SEL button, AVOL will be displayed. Then you can If you still have questions after going through the checklist, please consult pre-select a constant switch-on volume by using the VOL knob. - Page 5 Ò É Ä Ñ ½ â ³ ý 3) Press the RPT button once to play the current track repeatedly, and the RPT CARE FOR USING CD'S: ONE will be visible on the LCD display. During MP3/WMA disc, MMC/SD or USB mode, press the RPT button twice About CD-R/CD-R/W discs: continuously to play the current folder repeatedly, and the RPT ABM will be In addition to commercially-recorded audio CD's, this unit can play CD-R and...
-
Page 6: Installation Method
During MP3/WMA file in disc, MMC/SD or USB mode: 1) In TRACK SEARCH mode, the LCD will display TRK T 000 and flash the biggest INSTALLATION METHOD digit 0 that the SD/MMC card or USBstick contain. (if the number of tracks is less than 100 and more than 9, it will be TRK 00) Then press the VOL+ or VOL- This is an anti-theft installation method. -
Page 7: Wires Connection
WIRES CONNECTION 25. RESET BUTTON RED R Before operating the unit for the first time, or after replacing the car battery or RCA LINE OUT changing the connections. You must reset the unit. WHITE L Press this button with a cuspidal object. This operation will erase the clock setting and some stored contents. -
Page 8: Operation Of Remote Control
OPERATION OF REMOTE CONTROL MAINTENANCE OF REMOTE CONTROL 1. Power On/Off. An insulation tag was installed in your remote by the manufacturer to prevent the 2. Mute Button battery from draining. Removing the tag from the remote before using. Loudness Button Audio Level &...