Naxa NCA-683 Instruction Manual
  1. Manuals
  2. Brands
  3. Naxa Manuals
  4. Car Receiver
  5. NCA-683
  6. Instruction manual

Naxa NCA-683 Instruction Manual

Fold down full detachable pll electronic tuning stereo am/fm radio mp3/cd player with text function, usb input, sd card slot,mp3(esp) anti-skip protection & remote control
Hide thumbs Also See for NCA-683:
Table of Contents

Advertisement

Quick Links

Download this manual See also: User Manual
Enlarged version
IMPORTANT INFORMATION REQUIRED BY THE FCC
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1)this device may not cause harmful interference; and (2) this device must accept
any interference received, including interference that may cause undesirable operation.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation .
This equipment generates.uses and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful interference to radio elevation
reception, which can be determined by turning the equipment off and on. The user is encouraged
to try to correct the interference by one or more of the following measures:
* Reorient or relocate the receiving antenna.
* Increase the separation between the equipment and receiver.
* Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
* Consult the dealer or an experienced radio/TV technician for help.
MODEL: NCA-683

INSTRUCTION MANUAL

SCN
BND
_
LOU
ST
VOL
LOC
CLK
+
SEL
TOP
MOD
1
Fold Down Full Detachable PLL Electronic Tuning
Stereo AM/FM Radio MP3/CD Player With Text Function, USB Input,
SD Card Slot,MP3(ESP) Anti-Skip Protection & Remote Control
INT
RPT
RDM
2
3
4
5
6
APS
MUTE
POWER
+
MUTE
DN
SEL
UP
-
CLK
A.P
ST
MODE
BAND
LOC
LOUD
TOP/
INT
RPT
SCN
1
2
3
4
5
6
RDM
AUX

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the NCA-683 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Naxa NCA-683

Summary of Contents for Naxa NCA-683

  • Page 1: Instruction Manual

    MODEL: NCA-683 INSTRUCTION MANUAL MUTE IMPORTANT INFORMATION REQUIRED BY THE FCC This device complies with Part 15 of the FCC Rules. Operation is subject to the following two POWER conditions: (1)this device may not cause harmful interference; and (2) this device must accept any interference received, including interference that may cause undesirable operation.
  • Page 2 Preface Thank you for purchasing this car audio product. Please read this manual carefully before operating this car audio product. Please keep this manual for future use. It will be helpful to you if you are encounter any operational problem. Selecting fine audio equipment is only the start of your musical enjoyment.

  • Page 3: Location And Function Of Controls

    LOCATION AND FUNCTION OF CONTROLS SPECIFICATION GENERAL Supply Voltage DC 12 V. Negative Ground Current Consumption Max.15A Power Output 40W X 4ch (Measured at DC 14.4 V) Number of channels 2 STEREO channels. MUTE Unit Dimensions 178[W] X 165[D] X 50[H] mm. FM SECTION Frequency range 87.50MHz -107.90MHz...

  • Page 4: Troubleshooting

    b) When pressed longer 2 seconds, it is activated as cyclical mode of following TROUBLE SHOOTING functions for user’s selection. ->BEEP (ON/OFF) -> USER SET(FLAT/CLASSIC/ROCK/POP) Before using the check list please make all the connections first. ->VOL(LAST/DEFA) ->CLK(ON/OFF)->CLK(12/24)mode. If you still have questions after going through the checklist, please consult After selecting the desired mode, rotate the VOL knob to select one setup your local customer service representative.

  • Page 5: Band Button

    7. BAND BUTTON Ò É Ä Ñ ½ â ³ ý CARE FOR USING CD'S: During radio mode, press the BND button briefly to select the radio broadcasting band you would like to hear. The AM/FM band is toggled cyclically through the About CD-R/CD-R/W discs: tuning bands: ->FM 1->...

  • Page 6: Installation

    12. PRESET STATION MEMORY AND TOP/>||, INT, RPT, RDM BUTTONS INSTALLATION a) During radio mode: Go to any preset station by pressing one of the 6 preset station buttons (1-6). If one of these buttons is pressed for more than 2 seconds, the station currently INSTALLATION METHOD being listened to will be memorized into the selected preset button.

  • Page 7: Wires Connection

    17. SCAN BUTTON WIRES CONNECTION Press the SCN button to scan the radio frequency. If a valid signal has detected, the current frequency will be hold and blinking for 5 seconds, then press SCN RED R RCA LINE OUT again to stop scan and remain the current frequency; otherwise, the radio will GRAY WHITE L go on to scan the other radio frequency 5 seconds later.

  • Page 8: Operation Of Remote Control

    MAINTENANCE OF REMOTE CONTROL OPERATION OF REMOTE CONTROL An insulation tag was installed in your remote by the manufacturer to prevent the 1. Power On/Off battery from draining. Removing the tag from the remote before using. 2. Mute Button POWER Loudness Button MUTE 4.

Table of Contents