Selecting The Signal Connectors And Cables; Connecting The Monitor - HP L1755 User Manual

Setting Up the Monitor

Selecting the Signal Connectors and Cables

There are two signal input connectors:
■
VGA connector
■
DVI-I connector (available on select models)
The monitor will automatically determine which inputs have
valid video signals. The inputs can be selected through the
On-Screen Display (OSD) feature or by pressing the – button (to
enable DVI signal input) or the
input) on the monitor front bezel.
The video mode supported by the DVI-I connector is determined
by the video cable used. For digital operation, use the DVI-D
signal cable provided. For analog operation, use the VGA signal
cable or VGA to DVI-I signal cable provided.

Connecting the Monitor

1. Place the monitor in a convenient, well-ventilated location
near your computer.
3–4
+
button (to enable VGA signal
User Guide