HP L1755 User Manual page 25

Setting Up the Monitor
3. Install the adapter plate onto the swing arm or other mounting
fixture using the screws removed from the monitor base.
Using the Quick Release Adapter Plate to Mount the Display to a
Swing Arm
✎
For standing mounting purposes, when the base is removed, four
threaded mounting holes are exposed on the display panel. These
mounting holes are spaced 100 mm apart and are compliant with
the Video Electronics Standards Association (VESA) standard for
mounting flat panel displays.
4. Pull down the quick release latch on the back of the display
panel and mount it to the adapter plate on the swing arm or
other mounting fixture until it latches into place.
3–16 User Guide