Selecting The Signal Connectors And Cables - HP LP2465 User Manual

Selecting the Signal Connectors and Cables

The monitor features two DVI-I connectors capable of supporting either analog or digital input.
The video mode supported by the DVI-I connector is determined by the video cable used.
●
For digital operation, use the DVI-D signal cable provided. Connect the DVI-D signal cable to a
DVI-I connector on the monitor and the other end to the DVI connector on the computer.
●
For analog operation, use the DVI-I to VGA signal cable provided. Connect the DVI-I to VGA signal
cable to a DVI-I connector on the monitor and the other end to the VGA connector on the computer.
The monitor will automatically determine which inputs have valid video signals. The inputs can be
selected through the On-Screen Display (OSD) feature by pressing the
panel.
Figure 3-3
Figure 3-4
ENWW
Connecting the DVI-I to VGA Signal Cable
Connecting the DVI-D Signal Cable
Input Select
Selecting the Signal Connectors and Cables
button on the front
7