Table of Contents
Advertisement
2
Installing the Starter Rope
No Parts Required
Procedure
Pull the starter rope through the rope guide on the
handle (Figure 5).
1. Starter rope
Note: To make the rope easier to install, squeeze the
control bar on the handle.
3
Filling the Engine with Oil
No Parts Required
Procedure
Your mower does not come with oil in the engine.
1. Remove the dipstick (Figure 6).
Figure 5
2. Rope guide
Figure 6
2. Slowly pour oil into the oil fill tube until the oil level
reaches the Full line on the dipstick (Figure 6). Do
not overfill. (Max. fill: 20 oz. (0.59 l), type: SAE 30
detergent oil with an API service classification of SF,
SG, SH, SJ, SL, or higher.)
3. Install the dipstick securely.
Important: Change the engine oil after the first
5 operating hours ; change it yearly thereafter.
Refer to Changing the Engine Oil.
4
Charging the Battery
No Parts Required
Procedure
Electric-start models only
Refer to Charging the Battery in the Maintenance
section.
7
Hide quick links:
Advertisement
Table of Contents
