Page 1
Inside you will fi nd many helpful hints on how to use This remote controller will only function and maintain your air conditioner properly. Just a little with the following Lennox inverter models – preventative care on your part can save you a great deal LNIV2610 of time and money over the life of your air conditioner.
CONTENTS HANDLING THE REMOTE CONTROLLER HANDLING THE REMOTE CONTROLLER ..3 Replacing batteries NOTE: Replace the batteries when there is no receiving beep Location of the remote controller ......3 from the indoor unit or if the transmission indicator on the Replacing batteries ...........
REMOTE CONTROLLER SPECIFICATIONS PERFORMANCE FEATURES Model RG35A(2)/BG(C)EF, RG35A1/BG(C)EF, RG35B/BG(C)E, RG35C/BG(C)E, RG36A2/BG(C)EF RG36C/BG(C)E RG36A(1)/BG(C)EF RG36B(1)/BG(C)E RG36A(1)/BG(C)EF, RG36A2/BG(C)EF, RG36B(1)/BG(C)E, RG36C/BG(C)E Rated Voltage 3.0V (Dry cell batteries R03/LR03 x 2) Signal Receiving Range 8m (when using 3.0 voltage, up to 11m) Environment -5ºC ~ 60ºC PERFORMANCE FEATURES ON/OFF O N /OF F...
FUNCTION BUTTONS FUNCTION BUTTONS ON/OFF Button ( UP Button ( ON/OFF Press this button to increase setting temperature or to Operation starts when this button is pressed and stops when increase the Hour setting during Timer setting. this button is pressed again. MODE Button DOWN Button ( Press this button to decrease setting temperature or to...
FUNCTION BUTTONS INDICATORS ON LCD (continued) TIMER OFF Button Transmission Indicator Press this button to initiate the auto-off time sequence. This transmission indicator lights when remote controller Each press will increase the auto-timed setting in 30 minute transmits signals to the indoor unit. increments.When the setting time displays 10H, each press will increase the auto-timed setting in 60 minute increments.
HOW TO USE THE BUTTONS HOW TO USE THE BUTTONS Auto operation Dehumidifying operation Ensure the unit is plugged in and power is on. The Ensure the unit is plugged in and power is on. The OPERATION indicator on the display panel of the indoor unit OPERATION indicator on the display panel of the indoor unit starts fl...
HOW TO USE THE BUTTONS HOW TO USE THE BUTTONS Timer operation CAUTION Press the TIMER ON button can set the auto-on time of the The effective operation time set by the remote controller for the timer function is limited to the following settings: 0.5, 1.0, unit.
HOW TO USE THE BUTTONS HOW TO USE THE BUTTONS Example of Timer Setting SLEEP / FRESH function • Pressing this button for less than 2 seconds will initiate the SLEEP function. Keep pressing this button for more than 2 TIM ER ON OFF TIMER ON OFF seconds and the FRESH function is initiated.