Sleep Timer Mode - HP LP2065 20" User Manual

■
Multiple Inputs are Active— Use the OSD to select the
desired video input— Indicates the monitor is connected to
two video inputs. The monitor is trying to display both
inputs, but after 10 seconds the monitor uses the default
signal input.
■
Auto Adjustment is in Progress— Indicated the
auto-adjustment function is active.
■
Monitor Going to Sleep— Indicates the screen display is
entering a sleep mode.
■
Check Video Cable— Indicates the video cable is not
properly connected to the computer.
■
OSD Lock—The OSD can be enabled or disabled by
pressing and holding the Menu button on the front panel for
10 seconds. If the OSD is locked, the warning message "OSD
Lock-Out" displays for ten seconds.
❏
If the OSD is locked, press and hold the Menu button for
10 seconds to unlock the OSD.
❏
If the OSD is unlocked, press and hold the Menu button
for 10 seconds to lock the OSD.

Sleep Timer Mode

The Sleep Timer mode is an energy-saving feature that enables
you to set a time for the monitor to power on and off at the same
time every day. This also extends the life of the backlight bulbs in
the monitor. The Sleep Timer has five settings:
■
Set Current Time
■
Set Sleep Time
■
Set On Time
■
Timer: On/Off
User Guide
Operating the Monitor
4–17