3 Plug the standard USB end of the cable into the USB
connector on the PS/2 adapter
4 Plug the PS/2 adapter into an available PS/2 port on your
computer.
You are now ready to install the device drivers for your
operating system.
NOTE: Only the standard scrolling features are available when
the mouse is connected to the PS/2 port.
Installing the Device Drivers
If you are running the Windows NT
OS 9.2 (or higher), the operating system supports Plug and
Play operation and installs the default device drivers
automatically.
Use the following procedures to install the default device
driver for your operating system.
Optical Notebook Mouse
Mouse and PS/2 adapter
5
®
operating system or Mac