Installation Installation; Starting - LG MFL68083701 Owner's Manual

Refrigerator-freezer
Table of Contents

Advertisement

Installation
1. Select a good location.
Place your fridge-freezer where it is easy to use.
2. Avoid placing the unit near heat sources, direct
sunlight or moisture.
Do not place in any outdoor sheltered location
or where it can be exposed to environmental
conditions.
3. To ensure proper air circulation around the
fridge-freezer, please maintain sufficient space
on both the sides as well as top and maintain at
least 2 inches (5 cm) from the rear wall.
4. To avoid vibration, the unit must be leveled.
If required, adjust the leveling screws to
compensate for the uneven floor.
The front should be slightly higher than the rear
to aid in door closing.
Leveling screws can be turned easily by tipping
the cabinet slightly.
Turn the leveling screws counterclockwise (
to raise the unit, clockwise (
5. Clean your fridge-freezer thoroughly and wipe
off all dust dust which may have accumulated
during shipping.
6. Install accessories such as ice cube box, etc., in
their proper places. They are packed together to
prevent possible damage during shipment.
7. Connect the power supply cord (or plug) to the
outlet. Don't double up with other appliances
on the same outlet.
Installation
)
) to lower it.
11
Appliance usage range
This appliance is intended to be used in household
and similar applications such as:
· staff kitchen areas, offices and other
domestic type environments.
· hotels, motels and other residential type
environments;
· bed and breakfast type environments;

Starting

When your refrigerator is installed, allow it 3-4
hours to stabilize at normal operating temperature
prior to filling it with fresh or frozen foods.
If power plug is disconnected, allow 5 minutes
delay before restarting.
Your refrigerator is now ready for use.
Note
Do not move refrigerator while the refrigerator
is operating.
Compressor may emit a temporary rattling noise.
(This is normal and will not impact on the
performance or the life of the compressor.
The rattling will stop, if the rattling sound does
not stop after 1 minute, turn off the power, wait
5 minutes and then turn back on again.
Climate class
The appliance is designed to operate at the limited
range of ambient temperature, depending on
climate zones. Do not use the appliance at the
temperature out of the limit. Climate class of your
appliance is indicated on the label with technical
description inside the fridge compartment.
Class
Symbol
Extended
SN
temperate
Temperate
N
Subtropical
ST
T
Tropical
Ambient temperature
range °C
+10 ~ +32
+16 ~ +32
+16 ~ +38
+16 ~ +43

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents