1090 Lcd Unit - Lenovo E10-30 Hardware Maintenance Manual

1090 LCD unit

For access, remove these FRUs in order:
• "1010 Battery pack" on page 34
• "1020 Dummy card" on page 35
• "1030 Keyboard" on page 36
• "1040 Hard disk drive(HDD)/Memory/Mini PCI Express Card slot
compartment cover" on page 38
• "1050 Hard disk drive" on page 40
• "1060 PCI Express Mini Card for wireless LAN/WAN" on page 42
• "1070 Fan assembly and Heat Sink assembly" on page 44
• "1080 System board" on page 46
Figure 9. Removal steps of LCD unit
Remove two screws
Step Screw (quantity)
a M2 × 5 mm flat-head,
nylok-coated (2)
When installing:
• Route the antenna cables along the cable guides. As you route the cables,
make sure that they are not subjected to any tension. Tension could cause the
cables to be damaged by the cable guides, or a wire to be broken.
• Make sure that the LCD connector is attached firmly and make sure that you
do not pinch the antenna cables when you attach the LCD assembly. Route
the LCD cable along the cable guides.
a
.
a
Color Torque
Black
Lenovo E10-30
a
P/N
1.85+/-0.15 kgfcm 90205493
49