1090 Lcd Unit - Lenovo S435 Hardware Maintenance Manual

Lenovo S435 Hardware Maintenance Manual

1090 LCD unit

For access, remove these FRUs in order:
• "1010 Battery pack" on page 35
• "1020 Hard disk drive(HDD)/Memory/Mini PCI Express Card slot
• "1030 PCI Express Mini Card for wireless LAN/WAN" on page 37
• "1040 Hard disk drive" on page 39
• "1050 DIMM" on page 41
• "1060 Fan assembly and Heat Sink assembly" on page 42
• "1070 Keyboard" on page 44
• "1080 System board" on page 46
Figure 9. Removal steps of LCD unit
Remove three screws
When installing:
• Route the antenna cables along the cable guides. As you route the cables,
• Make sure that the LCD connector is attached firmly and make sure that you
50
compartment cover" on page 36
a
a
a
Step Screw (quantity)
a
M2 × 2 mm, flat-head,
nylok-coated (1)
M2.5 × 5 mm, flat-head,
nylok-coated (3)
make sure that they are not subjected to any tension. Tension could cause the
cables to be damaged by the cable guides, or a wire to be broken.
do not pinch the antenna cables when you attach the LCD assembly. Route
the LCD cable along the cable guides.
b
and the screw .
Color
Black
Black
a
b
Torque
1.85+/-0.15 kgfcm
3.0+/-0.3 kgfcm