Lenovo E10-30 Hardware Maintenance Manual page 30

Lenovo E10-30 Hardware Maintenance Manual
Putting your computer to sleep
If you will be away from your computer for only a short time, put the computer
to sleep. When the computer is in sleep mode, you can quickly wake it to resume
use, bypassing the startup process. To put the computer to sleep, do one of the
following:
• Close the display lid.
• Press the power button.
• Do the proper operations in the operating system.
Windows 7:
Windows 8.1:
To wake the computer, do one of the following:
• Press any key on the keyboard.
• Press the power button.
Putting your computer to hibernate
By using this mode, you can turn off the computer completely without saving
files or exiting from any program that is running. When the computer enters
hibernation mode, all open programs, folders, and files are saved to the hard
disk drive, and then the computer turns off.
To put the computer into hibernation mode, do the following:
• Windows 7:
26
2. Select Power
→ Sleep.
Click Start
Open the charms bar, then select Settings
Attention:
• Wait until the power indicator light starts blinking (indicating that the
computer is in sleep mode) before you move your computer. Moving your
computer while the hard disk is spinning can damage the hard disk, causing
loss of data.
→ Hibernation.
Click Start
→ Shut down.
→ Power → Sleep.