Table of Contents
Advertisement
Troubleshooting
Problem
Image is not
centered.
"No Connection,
Check Signal Cable"
is displayed on
screen.
"Out of Range. Set
Monitor to 1280 x
1024 @ 60Hz" is
displayed on screen.
A–2
Possible Cause
Position may need
adjustment.
Monitor video cable is
disconnected.
Video resolution and/or
refresh rate are set
higher than what your
monitor supports.
Solution
Press the Menu button to
access the OSD Menu.
Select Image Control/
Horizontal Position or
Vertical Position to adjust
the horizontal or vertical
position of the image.
Connect the 15-pin monitor
video cable to the VGA
connector on the computer,
or connect the DVI-D signal
cable to the DVI connector
on the computer. Be sure
that the computer power is
off while connecting the
video cable.
Restart your computer and
enter Safe Mode. Change
your settings to a supported
setting (see the table in
"Preset Video Modes" in
Appendix B). Restart your
computer so that the new
settings take effect.
User's Guide
Advertisement
Table of Contents
