HP FP9419 User Manual page 17

2. Place the pedestal all the way towards the bottom of the
monitor as shown in the following illustration 1.
Inserting the Base onto the Monitor Pedestal
3. Remove the plastic cap on the pedestal end 2.
4. Using both hands, firmly push the circular base into the bottom
of the pedestal to lock the pedestal base in place 3. When the
base locks, it will make a clicking sound. Make sure the base
is securely locked onto the pedestal before continuing with the
setup.
5. Stand the monitor in the upright position.
Å
WARNING: Tilt the monitor
carefully. If you tilt the monitor back
more than 30 degrees, beyond its
easily adjustable position, it could
fall over. Position the monitor so
that it cannot fall off the table if
bumped.
User's Guide
2
1
Setting Up the Monitor
3
3–3