Lenovo E10-30 User Manual page 22

Chapter 2. Starting to use Windows
Putting your computer to sleep
If you will be away from your computer for only a short time, put the
computer to sleep. When the computer is in sleep mode, you can quickly
wake it to resume use, bypassing the startup process. To put the computer to
sleep, do one of the following:
• Close the display lid.
• Press the power button.
• Do the proper operations in the operating system.
Windows 7:
Click Start
Windows 8.1:
Open the charms bar, then select Settings
Attention:
• Wait until the power indicator light starts blinking (indicating that the computer is in
sleep mode) before you move your computer. Moving your computer while the hard
disk is spinning can damage the hard disk, causing loss of data.
To wake the computer, do one of the following:
• Press any key on the keyboard.
• Press the power button.
Putting your computer to hibernate
By using this mode, you can turn off the computer completely without
saving files or exiting from any program that is running. When the computer
enters hibernation mode, all open programs, folders, and files are saved to
the hard disk drive, and then the computer turns off.
To put the computer into hibernation mode, do the following:
• Windows 7:
Click Start
18
→ Sleep.
→ Hibernation.
→ Power → Sleep.