3. Remove the screws
cover
3
.
4. Reinstall the new base cover
5. Turn the computer over again. Connect the ac power adapter and all cables.
Replacing the solid-state drive
Before you start, print these instructions.
Note: Depending on the model, your computer might look slightly different from the illustrations in this topic.
Attention: The solid-state drive is very sensitive. Incorrect handling can cause damage and permanent loss
of data. Observe the following guidelines:
78
User Guide
1
and loosen the screws
1
, tighten the screws
2
that secure the base cover. Then remove the base
2
, and then reinstall the screws
3
.