Smeg G30 Instructions For Use Manual page 14

Instructions for the installer
If a plug and socket connection is being used make sure that the plug and
socket are compatible. Avoid use of adapters and shunts as these could
cause overheating and burns.
Operation at 220-240 V~: use a
three-core cable of the type
2
H05V2V2
-F (3 x 1.5 mm cable for
2
electric hobs and 3 x 0.75 mm cable
for gas hobs)
The end to be connected to the
appliance must be an earth wire
(yellow-green) at least 20 mm
longer.
The manufacturer declines all responsibility for damage to persons or
things caused by the non-observance of the above prescriptions or
deriving from tampering with any part of the appliance.
35