HP 1910 User Manual page 30

Icon
24 Chapter 4 Operating the Monitor
Main Menu Options
Language
Information
Factory Reset
Source Control
Sub-menu Options
Sleep Timer
Current Settings
Recommended Settings
Serial Number
Version
Backlight Hours
Service Support
DVI
HDMI
VGA
Description
Provides the timer-adjustment menu
options:
Set Current Time — Sets the current
time in hours and minutes.
Set Sleep Time — Sets the time you
want to place the monitor in sleep mode.
Set On Time — Sets the time you want
the monitor to wake up from sleep
mode.
Timer — Sets the Sleep Timer feature
on or off; the default setting is Off.
Sleep Now — Immediately sets the
monitor to enter sleep mode.
Selects the language in which the OSD
menu is displayed. The factory default is
English.
Selects and displays important
information about the monitor.
Provides the current input video mode.
Provides the recommended resolution
mode and refresh rate for the monitor.
Reports the serial number of the
monitor. The serial number is needed if
contacting HP technical support.
Reports the firmware version of the
monitor.
Reports the total hours of backlight
operation.
For service support, go to:
http://www.hp.com/support
Returns settings to factory defaults.
Selects the video input signal. VGA is
the factory default.
Selects DVI as the video input signal.
Selects HDMI as the video input signal.
(select models)
Selects VGA as the video input signal.