Setting Up The Monitor; Installing The Monitor Pedestal - HP 1706 User Manual

Setting Up the Monitor

To set up the monitor, ensure that the power is turned off to the
monitor, computer system, and other attached devices, then
follow the steps below.

Installing the Monitor Pedestal

To install the monitor pedestal:
1. Place the pedestal plate on your desktop or table and check to
be sure the arrow on the underside of the plate is facing
forward.
✎
Do not install the base if the monitor will be used on a wall,
swing arm, or other mounting fixture; instead see the section on
"Mounting the Monitor" in this chapter.
User Guide
3
3–1