Page 1
High-fidelity Noise-isolating earphones ACCU•Driver ™ high performance, balanced-armature drivers are specified for an accuracy U s e r M a n u a l response of 85% or better.
Page 2
Caution In rare instances an eartip may come off in the ear canal when removing the earphone. If this should occur and the eartip cannot be easily removed, it is recommended that you promptly contact an audiologist or other medical professional.A professional can use blunt tweezers to remove the eartip.
Page 3
Included • hf5 earphones • Assortment of ACCU•Fit ™ eartips • ACCU•Filter ™ wax filters with removal tool • Pouch Identification A. Earphones B. Cable slider C. 3.5 mm stereo plug...
Care • Do not expose the earphones to extreme temperatures. • Avoid dropping and strong impact. • Leave eartips on the earphones for shock protection. • Do not pull on the cord to remove the earphone from the audio device or the ear. •...
Selecting an Eartip 3-Flange Foam Glider standard large The eartip that is most comfortable is the likely choice, but it MUST SEAL well in your ear. If you can easily hear others when the volume is off, you don’t have a good seal. Twist it in deeper, or choose another eartip.
Proper Insertion Important: Sound quality, full bass response and noise isolation all depend on a good eartip seal in the ear canal. See a video demonstration at www.etymotic.com. • Carefully insert the earphone while pulling up and out on the back of the ear.
Page 7
ACCU•Filter Wax Filters ™ Etymotic earphones have special ACCU•Filter wax filters that smooth the frequency response and prevent ear wax from entering the earphones. An ACCU•Filter is located at the end of the earphone and is visible when the eartip is removed. If a filter becomes clogged, it should be replaced.