ABOUT ET YMOTIC RESEARCH, INC. Etymotic Research, Inc. (ER) is a research, development and manufacturing company that designs products to measure, improve and protect hearing. ER has developed some of the most innovative hearing technology available today. Etymotic means “true to the ear.”...
ABOUT ET YMOTIC RESEARCH ABOUT ER-4 EARPHONES Noise reduction with ER-4 MicroPro earphones occurs naturally from the inserts. Other earphones with active noise-cancelling add circuit noise and require bulky batteries. In-the-ear, high fidelity transducers combine flat frequency response with isolation from external noise. The white 3-flange eartips provide 35 dB average external noise isolation.
CD and MP3 recordings. The sensitivity is comparable to home and professional earphones. ER-4S earphones are ideal for home stereo use and computer use. ER-4S earphones can be used with a headphone amplifier when using low power portable devices. ER-4S is the earphone preferred by musicians and audiophiles.
ABOUT ET YMOTIC RESEARCH SYSTEM INCLUDES • ER•4 MicroPro earphones • 5 ft. cord with 3.5 mm stereo phone plug • ⁄ " stereo phone adapter plug • 6 white 3-flange eartips • 10 foam eartips (medium) • Filter changing tool •...
In addition to six white 3-flanged eartips, ER-4 MicroPro Earphones are supplied with ten disposable foam eartips. Both types provide excellent sound reproduction when properly inserted. White 3-flange eartips These reusable eartips should be cleaned regularly. Cleaning the white 3-flange eartips 1.
Blue earphone = left ear Try the white 3-flange and foam eartips to determine the best fit for comfort and isolation. The sound quality and noise isolation depend on how well the eartips seal. If the earphones seem to lack bass, insert the earplug deeper into the ear canal to obtain a better seal, or try the other eartip option.
CHANGING FILTERS ER-4 MicroPro Earphones have special filters that shape the frequency response and prevent earwax from entering the earphones. These filters, identified by a green acoustic mesh in a small metal barrel, are located at the end of the earphone and are visible when the eartip is removed. When the filters become clogged they should be replaced.
• Do not expose earphones to extreme temperatures. • Avoid dropping or strong impact. Extreme shock can damage the earphones. • Always leave an eartip on the earphone for shock protection. • Keep earphones away from water as this can adversely affect sound quality. Perspiration entering the nozzle may cause the earphone to temporarily stop working.
ER•4 MicroPro Earphones (foam) $330.00 ER•4 MicroPro Earphones (3-flange) $330.00 ER•4 MicroPro Earphones $330.00 ER•6 Isolator Earphones $139.00 Earbud $49.99 Active-Noise-Canceling Battery Operated $149.99 Active-Noise-Canceling Battery Operated $299.99 Earbud Active-Noise-Canceling Battery Operated $199.99 How We Measure Noise Isolation Real-Ear-Attenuation-at-Threshold (REAT) Method—The ANSI standard method of measuring the noise attenuation of hearing protectors and earphones is to compare the quietest sound heard with the earphone in place to the quietest sound heard with the ears open.
Page 12
ABOUT ET YMOTIC RESEARCH ER•4 MicroPro Earphones $330.00 ER•6 Isolator Earphones $139.00 Earbud $49.99 Active-Noise-Canceling Battery Operated $149.99 Active-Noise-Canceling Battery Operated $299.99 Earbud Active-Noise-Canceling Battery Operated $199.99 How We Measure Response Accuracy Earphone response was measured on a KEMAR 25-band accuracy scores are calculated by summing the difference between the earphone response and the target response in each 1/3-octave band from 50 Hz to 12.5 kHz.
ABOUT ET YMOTIC RESEARCH Frequency response: 20 Hz to 16 kHz ±4 dB Acoustic polarity: +electrical = +acoustic Transducer type: Balanced armature 1 kHz sensitivity (ER-4B/ER-4S): 108 dB SPL for a 1.0 volt input 1 kHz sensitivity (ER-4P): 108 dB SPL for a 0.25V input Impedance (ER-4B/ER-4S): 100 Ohms nominal Impedance (ER-4P): 27 Ohms nominal Maximum output: 122 dB SPL...
Page 14
61 Martin Lane • Elk Grove Village, IL 60007 www.etymotic.com • 1-888-ETYMOTIC ER-6 Isolator™ and ER-4 MicroPro™ are trademarks of Etymotic Research, Inc. The ER-4 MicroPro™ Earphones and ER-6 Isolator™ Earphones are covered by one or more of the following U.S. patents: #4,677,679, #4,763,753, #5,887,070 and other patents pending.