Advertisement
EXT controller.
When a scart type connected source is selected with a Bang & Olufsen remote control, the B&O TV starts to
parse control data from the remote control to the attached device, via the scart cable.
The OneRemote EXT controller captures these data and converts these into IR data, that can operate the
specific device.
The converted IR data is being
transmitted via a small IR-emitter
that has to placed in front of the
device to be controlled. Here it
emits the same IR data into the
front of the device, that it was
made to receive from its own
remote control.
As an EXT controller operates on data received via the scart cable, it will function only when attached to a
B&O TV.
If both the B&O TV and the device are equipped with DVI and/ or HDMI sockets, a suitable cable can be
added to improve the picture quality. The EXT cable will still be needed for control data and maybe also the
sound.
Refer to the user manuals for both the TV and the device, about correct installation of HDMI/ DVI cables. In
a setup with link rooms, all rooms will be able to operate the device, via the link system.
With a OneRemote OneWay or TwoWay cable, the device can be placed up to 25 metres away from the
TV. It could be placed in another room, under a sofa or where ever it suits, as operation is handled via the
Scartcable.
If both the TV and the device are equipped with a HDMI connection, a HDMI cable can be added to improve
picture and sound quality.
w w w . o n e r e m o t e . d k
Page 3
Advertisement
