Step 2: Install Memory Modules - Gigabyte GA-8ILFT Series User Manual

Step 2: Install memory modules

The motherboard has 2 dual inline memory module (DIMM) sockets. The BIOS will automatically
detects memory type and size. To install the memory module, just push i t vertically into the DIMM Slot
.The DIMM module can only fit in one direct ion due to the notch. Memory size can vary bet ween
sockets.
Total Memory Sizes With Unbuffered DDR DIMM
Devices used on DIMM 1 DIMM x 64 / x 72
64 Mbit (2M x8x4 banks) 128 MBytes
64 Mbit (1M x16x4 banks) 32 MBytes
128 Mbit(4M x8x4 banks) 256 MBytes
128 Mbit(2M x16x4 banks) 64 MBytes
256 Mbit(8M x8x4 banks) 512 MBytes
256 Mbit(4M x16x4 banks) 128 MBytes
512 Mbit(16Mx8x4 banks) 1 GBytes
512 Mbit(8M x16x4 banks) 256 MBytes
Notes: Double-sided x16 DDR memory devices are not support by Intel 845 chipset.
DDR
M When STR/DIMM LED is ON, you do not install / remove DDR from socket.
2 DIMMs x 64 / x 72
256 MBytes
64 MBytes
512 MBytes
128 MBytes
1 GBytes
256 MBytes
2 GBytes
512 MBytes
1. The DIMM slot has a notch, so the
DIMMmemory module can only fit in one direction.
2. Insert the DIMM memory module verticallyinto the
DIMM slot. Then push it down.
3. Close the plastic clip at both edges of theDIMM slots
to lock the DIMM module.
Reverse the installation steps when you wish to
remove the DIMM module.
- 11 - Hardware Installation Process