Gigabyte GA-8ILFT Series User Manual page 21

I) F_PANEL (2x7 pins connector)
HD (IDE Hard Disk Active LED)
SPK (Speaker Connector)
RST (Reset Switch)
PD+/PD_G-/PD_Y-(Power LED)
PW (Soft Power Connector)
Ø Please connect the power LED, PC speaker, reset switch and power switch etc of your chassis
front panel to the F_PANEL connector according to the pin assi g nment above.
RST-
PW+
RST+
PW-
SPK+ 1
PD+
PD_G-
SPK-
PD_Y-
1
HD-
HD+
Pin 1: LED anode(+)
Pin 2: LED cathode(-)
Pin 1: VCC(+)
Pin 2- P in 3: NC
Pin 4: Data(-)
Open: Normal Operation
Close: Reset Hardware System
Pin 1: LED anode(+)
Pin 2: LED cathode(-)
Pin 3: LED cathode(-)
Open: Normal Operation
Close: Power On/Off
- 21 - Hardware Installation Process