HP ProLiant ML110 Quickspecs page 26

QuickSpecs
Technical Specifications
HP SC40Ge SAS Host
Bus Adapter with RAID
HP E200/128 BBWC
Smart Array Controller
RAID Support
Logical Drives
Supported
Maximum Capacity
Data Transfer Method PCI-Express x8 - 2 GB/s maximum bandwidth
Port Transfer Rate
Simultaneous Drive
Transfer Ports
Protocols
External SAS
Connectors
Internal SAS
Connectors
Upgradeable Firmware 4MB flashable ROM
Dimensions (excluding
bracket)
Disk Drive and
Enclosure Protocol
Support
Architecture
SAS Connectors
Data Transfer Method PCI-Express x8 - 2 GB/s maximum bandwidth
PCI Bus Speed
Simultaneous Drive
Transfer Ports
Port Transfer Rate
Software upgradeable
Firmware
Maximum Capacity
Memory Addressing
Logical Drives
Supported
RAID Support
Upgradeable Firmware 4-MB flashable ROM
Disk Drive and
Enclosure Protocol
Support
DA - 12867 Worldwide QuickSpecs — Version 10 — 4.18.2008
RAID 1 (Mirroring)
RAID 0 (Striping)
Up to 2 Logical Volumes
Up to 10 drives total in all RAID volumes
Up to 2 Drives per RAID 1
Up to 8 Drives per RAID 0
3.6TB (8 x 450GB)
12 Gb/s per x4 Wide SAS Port (4 x 3 Gb/s)
2 x4 Wide SAS Connectors
3 Gbps SAS and 1.5 Gbps SATA
1.5 Gbps SATA (Serial Advanced Technology Attachment)
None
2 internal SFF8484 x4 SAS Connectors
6.6 x 2.5 x 0.6 in (16.8 x 6.4 x 1.6 cm)
3 Gbps SAS (Serial Attached SCSI)
1.5 Gbps SATA (Serial Advanced Technology Attachment)
64-bit
2 internal SFF8484 x4 Wide SAS Connectors
12 Gbps per x4 Wide SAS Port (4 x 3 Gbps)
PCI-Express x8
2 x4 Wide SAS Connectors
12 Gb/s per x4 Wide SAS Port (4 x 3 Gb/s)
Yes
3.6TB (8 x 450GB)
64-bit, supporting servers memory greater than 4 GB
<FILL IN>
RAID 1 (Mirroring)
RAID 0 (Striping)
RAID 5
3 Gbps SAS and 1.5 Gbps SATA
HP ProLiant ML110 Generation 5
Page 26