Program Play - Marantz ER2500 User Manual

SLEEP
2. Select the tracks to be programmed using the
TV POWER
numeric buttons on the remote control unit.
TV-INPUT
• To input a 2-digit track number to select a
track using the numeric buttons, first input
TV-VOL
y tracks in
the 10's digit and, within 2 seconds, input
the 1's digit.
ed tracks
R TV-CH
• When track 3 has been selected
scs.
TOP MENU TOP MENU
MENU MENU
3. Press ENTER button.
TUNE MODE TUNE MODE
5
• The selected track is programmed, and
MEMORY MEMORY
then unit enter to programming mode again
ZOOM ZOOM
for select the next program track.
OM OM CLR CLR
For VCD discs, FL Display will be like below.
E E NIGHT NIGHT
4. Repeat step 2 and 3 for programming more
remote
tracks. And then press 9 (STOP) button to
ode, the
program confirm completion of all the programming.
• If the number of programmed tracks exceeds
32, the display below will be shown.
SVCD
CD
5. Upon completion of all the programming, press
the 2 (PLAY)button.
The selected tracks are now played in the
programmed order.
Press 9 (STOP)button to stop program play.
6.
To check the programmed track
1. While the unit is stopped and in program mode,
press the Cursor(3 / 4) buttons on the remote
control unit repeatedly.
• Track number, program number and the
total playback time is displayed in order.
To clear the entire program
VCD
1. While the unit is stopped and in program mode,
press the CLEAR button on the remote control
unit for more than 3 seconds.
• All programmed tracks are cleared from
memory.
To delete a specified programmed track
1. While the unit is stopped and in program mode,
press the Cursor(3 / 4) buttons on the remote
control unit to select a track you want to delete.
VCD
2. Press the CLEAR button on the remote control
unit.
• A specified track will be deleted.
04.8.26, 4:32 PM
31