Sirius Satellite Radio Starmate 3 User Manual page 47

JumpSet
To set the Jump button to a specific channel (other than a traffic channel) when pressed, do
the following:
1. Use the channel up and down buttons to highlight the "JumpSet" option, and press the
Select button.
2. Figure 14 will be displayed.
3. Use the channel up and down buttons to tune to the channel you want assigned to the
Jump button. When the channel is tuned, press and hold the Jump button for 2 seconds
until Figure 15 is displayed.
The channel selected is now assigned to the Jump button.
To exit the Jump Settings menu, press the MENU button.
At any time while listening to a channel (other than a traffic channel), the channel may be as-
signed to the Jump button by simply pressing and holding the Jump button for 2 seconds.
Jump Setting
Tune to desired Ch. Tune to desired Ch.
press & hold press & hold
the the button button
figure 14 figure 14
Jump Setting
Traffic: NONE
JumpSet JumpSet
figure 15 figure 15
[ ]

Menu Options