Sirius Satellite Radio Starmate 3 User Manual page 27

Note: If the preset button already has a channel stored in it, the preset will be replaced by the
newly stored channel.
Using Channel Presets
The active band of presets is displayed in the lower right corner of the default display screen,
A, B or C. To change the active band, momentarily press and release the BAND button to
cycle between the preset bands.
The 10 preset channels in the active band can then be selected by momentarily pressing and
releasing the 0 through 9 buttons.
When you have chosen a preset channel, the band and preset number will be displayed in the
lower right corner of the default display screen. (Figure 8)
Searching for a Channel Preset (P TUne mode)
To quickly search through all of your presets in the P.TUNE mode, do the following:
Press and hold the BAND button for approximately 1 second to enter the P.TUNE mode.
1.
Preset Tuning Mode will momentarily be displayed and the top left and lower right cor-
ners of the display will invert to indicate the receiver is in the Preset Tune Mode. (Figure
9)
001 Channel Name
Artist Name Artist Name
Preset Stored
Song Title Song Title
Category 12:00P
figure 7 figure 7
001
Channel Name
Artist Name Artist Name
Song Title Song Title
Category 12:00P
figure 8 figure 8
A1
A3
[
Operation
]