BT BT4500 Quick Setup And User Manual page 4

Quick set-up guide
4
Where to put your phone
• Place the base within
3 metres of a mains power
socket and 3 metres of a
phone socket so the cables
will reach.
• Make sure it's at least a
metre away from other
electrical appliances to avoid
interference.
• Don't place the phone or
base in a bathroom or other
humid area.
• The product works by
sending radio signals
between the handset and
base. The strength of the
signal depends on where you
position the base. Putting it
as high as possible can help
give you the best signal.
IMPORTANT
• Don't connect the phone line
to a phone socket until the
handset is fully charged.
• The base station should
be plugged into the mains
power socket all the time.
1666 BT4500 UG [5].indd 4
1 Plug in
1. Plug the mains
power adaptor
into the base.
2
The phone line cord is pre-installed but don't
plug the other end into the wall socket yet.
If you need some help, call us on 0800 145 6789* or go to bt.com/producthelp
2. Plug the other end
of the power adaptor
into the wall power
socket and switch on.
1
09/04/2013 15:04