Table of Contents
Advertisement
Insignia 28" LED TV/DVD Combo
Waking INlink-compatible devices
When a connected INlink-compatible device is
turned off (in standby mode), Connect wakes (turns
on) the device.
1 Press TV-MENU. The on-screen menu opens.
2 Press
or
to highlight SETTINGS, then press
or ENTER. The SETTINGS menu opens.
3 Press
or
to highlight INlink, then press
ENTER. The SETTINGS · INlink menu opens.
4 Press
or
to highlight Connect, then press
ENTER. A list of HDMI CEC-compatible devices
you have connected opens.
5 Press
or
to highlight the device you want to
connect to, then press ENTER.
6 Press TV-MENU to return to the previous menu,
or press EXIT to close the menu.
Opening an INlink-compatible device's root
menu
You can open an INlink-compatible device's root
menu, then use your TV's remote control to control
the device, if the device has this feature.
1 Press INPUT, press
2 Press TV-MENU. The on-screen menu opens.
3 Press
4 Press
5 Press
6 Press TV-MENU to return to the previous menu,
www.insigniaproducts.com
or
INlink-compatible device you want, then press
ENTER.
or
to highlight SETTINGS, then press
or ENTER. The SETTINGS menu opens.
or
to highlight INlink, then press
ENTER. The SETTINGS · INlink menu opens.
or
to highlight Root Menu, then press
ENTER. The device's root menu opens, and you
can use your TV's remote control to control the
device.
or press EXIT to close the menu.
to highlight the
47
Advertisement
Table of Contents
