Table of Contents
Advertisement
Insignia 28" LED TV/DVD Combo
Using DVI (same as HDMI but requires an audio connection)
Note
You must use the HDMI1/DVI jack to connect a cable or satellite box using
DVI. If you use another HDMI jack, you will not hear sound from the TV
speakers.
On your TV
HDMI cable
3.5mm RCA
connector
connector
HDMI1/DVI
jack
AUDIO IN
1 Make sure that your TV's power cord is unplugged and all connected equipment is turned off.
2 Connect the incoming cable from the cable wall jack to the cable-in jack on the cable or satellite box.
3 Connect an HDMI-DVI adapter (not provided) to one end of an HDMI cable (not provided), then connect the
adapter to the DVI OUT jack on the cable or satellite box.
4 Connect the other end of the cable to the HDMI1/DVI jack on the back of your TV.
5 Connect a 3.5mm RCA audio cable (not provided) to the PC/DVI AUDIO IN jack on the back of your TV and to
the AUDIO OUT jacks on the cable or satellite box.
Note
When you connect the audio using the PC/DVI AUDIO IN jack, the audio
output is analog.
6 Plug your TV's power cord into a power outlet, turn on your TV, then turn on the cable or satellite box.
7 Press INPUT to open the INPUT SOURCE list.
8 Press
or
to highlight HDMI 1, then press ENTER.
Note
You can also press HDMI to select the cable or satellite box.
audio
PC/DVI
jack
www.insigniaproducts.com
3.5mm RCA
audio cable
Back of TV
Cable or
satellite box
HDMI cable with
HDMI-DVI adapter
15
Advertisement
Table of Contents
