Table of Contents
Advertisement
Insignia 28" LED TV/DVD Combo
Using analog audio
When you connect a home theater system or sound to the
On your TV
3.5mm audio
cable connector
/AUDIO OUT
jack
1 Make sure that your TV's power cord is unplugged and the home theater system or sound bar is turned off.
2 Connect a 3.5mm audio cable (not provided) to the
AUDIO IN jacks on the analog home theater system or sound bar.
3 Plug your TV's power cord into a power outlet, then turn on your TV.
4 Turn on the home theater system or sound bar, then set it to the correct source. For more information, see the
documentation that came with the home theater system or sound bar.
5 On your TV, set the Headphone/Audio Out option on the AUDIO menu to Audio Out Fixed or Audio Out
Variable. See the Headphone/Audio Out option in
3.5mm audio
cable
Home theater
system
Sound bar
www.insigniaproducts.com
/AUDIO OUT jack, the TV speakers are muted.
Side of TV
/AUDIO OUT jack on the side of your TV and to the
"Adjusting sound
settings" on page 54.
33
Advertisement
Table of Contents
