JBL VT4889ADP User Manual page 27

5. W rap the opposite end of the open jacket around the riser ring as
shown in Figure 4. Be certain that the bottom of the protective
jacket is tucked-in all the way around the riser ring as shown.
6. " Zip" up the Velcro strip and pull the draw cord closed as
required as shown in Figure 5. The protective jacket should now
be securely fastened all the way around the riser ring at the
bottom and top end of the jacket and should be closed securely
forming a protective closure around the connector panel.
7. Repeat the process for the other connector panel.
Figure 4
Figure 5
7
JBL Professional