JBL VT4889ADP User Manual page 23

11) NETWORK 100MB ACTIVITY
a) The Activity LED indicates data activity on the network line.
12) NETWORK 100MB LINK
a) The LINK LED indicates that the data is at 100 Megabits.
13) DATA
a) Yellow LED Flashes for received data packet addressed to this DPAN device.
CONNECTORS
X LR connectors allow connectivity to an analog audio source. This input can be used as a back-up to
CobraNet® or as a primary audio source in the absence of CobraNet®.
8) AUDIO IN
a) F-XLR Active 0K Ohm Balanced, 10K Ohm Unbalanced.
b ) Pin  Hot (Positive voltage produces outward cone motion of L.F. Transducers).
9) AUDIO OUT
a) M-XLR Passive Audio Pass-through.
b) Pin  Hot (Positive voltage produces
outward cone motion of L.F. Transducers).
10) HiQnet 100MB NETWORK Connector
a ) The network connector is a standard RJ-5 connector that allows the DPAN to connect to an
Ethernet network. Connection is made using a standard Category 5 cable to a network switch port.
MAC ADDRESS WINDOW
14) The MAC address is a unique 1 digit hexadecimal hardware address assigned to every network
device by the manufacturer and is not changeable by the user. This unique physical address enables
each device on the network to identify and communicate directly with other devices connected to the
network.

JBL Professional