Table of Contents
Advertisement
Quick Links
Download this manual
See also:
User Manual
Advertisement
Table of Contents
Related Manuals for Zanussi ZGO96524
Summary of Contents for Zanussi ZGO96524
- Page 1 User manual ZGO96524...
-
Page 2: Table Of Contents
• The cookware must not enter the control use. Do not remove the rating plate. It can in- zone. validate the guarantee. • Make sure that the cookware does not pro- trude over the edges of the cooking surface www.zanussi.com... - Page 3 • Do not change the specifications or modify is necessary when you operate the ap- this product. There is the risk of injury and pliance with intensity for a long time. damage to the appliance. www.zanussi.com...
-
Page 4: Installation
G 1/2". Screw the ply when: parts without force, adjust the connection in the – it can not get hot more than room tempera- necessary direction and tighten everything. ture, higher than 30°C; www.zanussi.com... - Page 5 • Make sure that there is an access to the 1. Light the burner. mains plug after installation. 2. Turn the knob on the minimum position. • Do not pull the mains cable to disconnect 3. Remove the knob. the appliance. Always pull the mains plug. www.zanussi.com...
- Page 6 55 mm must be installed separately for safety reasons 30 mm and to let easy remove oven from the unit. 830 mm 50 cm 120 cm 180 cm 2 360 cm www.zanussi.com...
-
Page 7: Product Description
3. Adjust the flame after it is regular. A) Burner cap and crown B) Thermocouple If after some tries the burner does not C) Ignition candle light, check if the crown and its cap are in correct positions. www.zanussi.com... -
Page 8: Helpful Hints And Tips
Warning! Do not use cast iron pans, protrude over the front edge of the potstones, grill or toaster plates on gas cooktop and that pots are centrally positioned burners. on the rings in order to achieve maximum stability and to obtain lower gas consumption. www.zanussi.com... -
Page 9: Care And Cleaning
Cleaning of the spark plug using a paste cleaner. This feature is obtained through a ceramic igni- • Make sure you position the pan supports tion candle with a metal electrode. Keep these correctly after cleaning. components well clean to prevent difficult light- www.zanussi.com... -
Page 10: What To Do If
5 seconds. The gas ring burns unevenly • Burner crown is blocked with • Make sure that the injector is food residues not blocked and the burner crown is clear of food particles. www.zanussi.com... -
Page 11: Technical Data
G20 (2H) 20 mbar = 10.5 kW Hob recess dimensions G30 (3+) 28-30 mbar = 763 g/h Width: 830 mm G31 (3+) 37 mbar = Length: 480 mm 750 g/h Electric supply: 220 V ~ 50 Hz Heat input www.zanussi.com... -
Page 12: Environment Concerns
>PE<,>PS<, etc. Discard the packaging mate- otherwise be caused by inappropriate waste rials as household waste at the waste disposal handling of this product. For more detailed facilities in your municipality. www.zanussi.com... - Page 13 www.zanussi.com...
- Page 14 www.zanussi.com...
- Page 15 www.zanussi.com...
- Page 16 www.zanussi.com/shop...