2.5 Initial Settings
Before using the device, we recommend you enable the Automatic
Record function and set up the correct date and time.
2.5.1 Set Automatic Recording
To enable the recording to start automatically after you turn on the
power, do the following:
Press the
1.
Press the
2.
Automatic Record and press the
button.
Press the
3.
and press the
Press the
4.
2.5.2 Set the Date and Time
To set the correct date and time, do the following:
Press the
1.
Press the
2.
button.
Press the
3.
value and press the
move to another field.
Repeat step 3 until the date and time
4.
setting is complete.
Note:
When the battery is drained dry , the user must reset the date/time before the funciotn - automatic
record is started. The device will still start to record after one minute if the user does not reset
the date/time, but the video will not have date / time.
button to enter the OSD menu.
/
button to select
/
button to select On
button.
button to exit the menu.
button to enter the OSD menu.
/
button to select Date / Time and press the
/
button to adjust the
button to
13