Table of Contents
Advertisement
3. CoNNECtor ANd WIrING dEtAILS
CoNNECtor PANEL dIAGrAM
1
Audio input connector
2 Audio link connector
3 RS-485 network input connector
4 RS-485 network link connector
5 AC mains input connector
6 AC mains link connector
7 Mains switch with internal neon indicator (red)
8 Status LED
9 Reset and Preset Control (access hole)
AC MAINS
Two Neutrik
PowerCon
®
fitted to the UniAmp 1214. The Input connector
(coloured blue) is a Neutrik
for connection of the AC mains supply; the Link
connector (coloured grey) is a Neutrik
is to facilitate connection to another module in an
adjacent enclosure.
Note that the Link connector is not
independently fused.
6
1
2
3
chassis connectors are
®
Type A, and is intended
®
Type B, and
®
User Guide - JBL Professional
®
8
9
4
5
6
The full-load power consumption of the amplifier
module is model dependant but does not exceed
250 VA, please refer to the individual data sheets for
model specific information. When "daisy-chaining"
AC mains between several enclosures of the same
type using the Input and Link connectors, ensure that
the current capacity of the supply is sufficient for
ALL amplifiers in the chain, and additionally, that
the total current drawn by all the amplifiers does
not exceed 16 A.
In practice, this means that the maximum
number of amplifiers (including the first
one) that may be daisy-chained in this way
is fifteen (230 V operation) or eight (115 V operation).
Only wire AC mains connectors according to the
table below:
PIN
CONNECT
L
Live
N
Neutral
Earth
(Ground)
UniAmp Power Amplifier Module , Model 1214
7
COLOUR
COLOR
(Europe)
Brown
Blue
White
Geen/Yellow
Green
201109/UA1214UG_v1.1
(US)
Black
Advertisement
Table of Contents
