Using Your Microwave Oven; Clock & Settings; Using Clean - Kenmore 790.8033 Series Use & Care Manual

Using Your Microwave Oven

This section gives instructions for operating each
function. Please read this section carefully.
CLOCK & SETTINGS (Control Panel Feature 18)
The microwave oven has settings that allow you to
customize the operation for your convience. Below is
the table showing the various settings. Touch the Clock
& Settings key multiple times to scroll to the desired
setting function.
Key press
Clock & Settings Digits flash
Clock & Settings
Clock & Settings
Clock & Settings
Clock & Settings
Clock & Settings
SETTING CLOCK (Control Panel Feature 18)
The clock can be disabled when the microwave is
first plugged in and the STOP key is selected.
To re-enable the clock follow clock instructions.
Example: To set the clock for 10:30.
Touch:
1.
1 0 3 0
2.
3.
NOTE:
If you begin to enter in an incorrect time (e.g. 2:89)
the 8 is an invalid digit and cannot be entered.
Enter the correct time.
STOP
display will show the last time of day set or a
blank display if no time of day has been set.
Code Option
Clock
oP-2
oP-3 Clean
oP-4
oP-5 Weight lb/kg
oP-6
Display Shows:
Time digits flashing
k, the
SETTING CONTROL LOCK ON/OFF ( Control Panel
Feature 1 ) 8
To turn ON Control Lock touch Clock & Settings
twice.
Touch:
1.
2.
. 3
To turn OFF the Control Lock, touch Clock & Settings
then touch
USING CLEAN (Control Panel Feature 18)
To enter Clean mode touch Clock & Settings three
times.
This is a preset timed cycle to boil water creating
steam to soften soils inside the microwave oven.
When the cycle is done remove the water and
wipe the inside of the microwave wit cloth.
NOTE: Place two cups of water in the microwave oven.
To get rid of odors inside the oven add some lemon
juice or vinegar into the water.
Touch:
1.
2.
3.
4.
EN-12
Display Shows:
Time digits flashing
Time of day
if time of day was set
h
Display Shows:
Time digits flashing