Sensor Operating; Using Sensor Cook; Using Sensor Reheat - Kenmore 790.8033 Series Use & Care Manual

SENSOR OPERATING INSTRUCTIONS
Sensor Cook allows you to cook most of your favorite
foods without selecting cooking times and power levels.
The display will indicate Sensing during the initial sensing
period.
The oven automatically determines required cooking time
for each food item. When the internal sensor detects a
certain amount of humidity coming from the food,it will
tell the oven how much longer to heat. The display will
show the remaining heating time. For best results for
cooking by sensor, follow these recommendations.
1. Food cooked with the sensor system should be at
normal storage temperature.
2. Always use microwavable containers.
3. Match the amount to the size of the container.
Fill containers at least half full for best results.
USING SENSOR COOK (Control Panel Feature 4)
Using SENSOR COOK lets you heat common
microwave-prepared foods without needing to
program times and cook powers.
Example: To cook frozen breakfast with sensor
Touch:
1.
2.
3.
4.
5.
Sensor Cook categories are selected by touching the
Sensor Cook key multiple times to scroll through the
Sc-1 to Sc-4 selections.
Display Shows:
EN-22
4. Be sure the outside of the cooking container and the
inside of the microwave oven are dry before placing
food in the oven. Beads of moisture turning into steam
can mislead the sensor.
5. Foods should always be covered with mic
plastic wrap, waxed paper, or a lid. Never use tight-
sealing plastic covers. They can prevent steam from
escaping and cause food to overcook.
6. Do not open the door or touch the STOP key during the
sensing time. When sensing time is over, the oven beeps
and the remaining cooking time will appear in the
display window. At this time you can open the door to
stir, turn, or rearrange the food.
USING SENSOR REHEAT (Control Panel Feature 3)
Using SENSOR REHEAT lets you heat common
microwave-prepared foods without selecting cooking
times and power levels.
Example: T
Touch:
1.
2.
3.
4.
5.
Sensor Reheat categories are selected by touching the
Sensor Reheat key multiple times to scroll through the
rh-1 to rh-4 selections.
rowavable
Display Shows: