Security Policy, version 1.0
Descriptions of LEDs on the rear panel are given in Table 5 – Rear Panel LED Definitions.
Item
10/100/1000 NIC 1 activity
1
LED
10/100/1000 NIC 1 link
2
LED
10/100/1000 NIC 2 activity
3
LED
10/100/1000 NIC 2 link
4
LED
5
UID LED
6
Power supply 2 LED
7
Power supply 1 LED
2.4 Roles, Services, and Authentication
The module supports four authorized roles:
•
Crypto Officer
•
User
•
HP User
•
Cluster Member
All roles require identity-based authentication.
2.4.1
Crypto Officer Role
The Crypto Officer accesses the module via the Web Management Console and/or the Command Line Interface
(CLI). This role provides all services that are necessary for the secure management of the module. Table 6 shows the
services for the Crypto Officer role under the FIPS mode of operation. The purpose of each service is shown in the
first column ("Service"), and the corresponding function is described in the second column ("Description"). The
keys and Critical Security Parameters (CSPs) in the rightmost column correspond to the keys and CSPs introduced
in Section 2.7.1.
Service
Authenticate to SKM
HP StorageWorks Secure Key Manager
Table 5 – Rear Panel LED Definitions
Description
Table 6 – Crypto Officer Services
Description
Authenticate to SKM with a username and
the associated password
© 2008 Hewlett-Packard Company
This document may be freely reproduced in its original entirety.
Status
Green = Activity exists.
Flashing green = Activity exists.
Off = No activity exists.
Green = Link exists.
Off = No link exists.
Green = Activity exists.
Flashing green = Activity exists.
Off = No activity exists.
Green = Link exists.
Off = No link exists.
Blue = Identification is activated.
Off = Identification is deactivated.
Green = Normal
Off = System is off or power supply has failed
Green = Normal
Off = System is off or power supply has failed
Crypto Officer passwords – read;
TLS/SSH keys – read
January 31, 2008
Keys/CSPs
Page 11 of 26