Operating For The First Time - Chef cooking CFE532WA User Manual

operating for the first time

choosing utensils for gas and electric hotplates
Refer to diagram below
GOOD BAD
GOOD BAD
(recessed base)
(recessed base)
installation and service warning
WARNING
• O nly an authorised person must install and service this
appliance (Certificate of Compliance to be retained)
• I n order to avoid tipping of appliance the anti-tilt plate
MUST be installed
• A ppliances requiring connection to 230 – 240V MUST
be earthed
• A n authorised person should inspect this appliance
every 5 years
• T his appliance must NOT be installed on a base, box or
in a closed cupboard
• I f the electrical supply cord is damaged, a qualified
person MUST replace the cord to avoid a hazard or
void your warranty
WARNING
• Surrounding kitchen cabinets MUST
WITHSTAND 85°C
• I n order to avoid a hazard the installation instructions
MUST be followed.
4 OPERATING FOR THE FIRST TIME Chef 540 Upright Cooker
BAD
BAD
BAD BAD
(undersize)
(convex base)
(convex base) (undersize)
1. Read all the Warning and Safety information
2. Remove all internal boxes and bags from oven
3. Clean out the oven interior with detergent and hot water
4. New appliances can have an odour during first
5. If your appliance is fitted with solid hotplates, turn
BAD
BAD
(moisture on hotplate)
(oversize)
(oversize) (moisture on hotplate)
Before operating first time
TIPS & INFORMATION
and polish with a soft cloth. DO NOT close oven door
until the oven is completely dry
operation. It is recommended to 'run in' the oven before
you cook. Run the oven at 180°C for 2 – 4 hours and
ensure that the room is well ventilated
heat setting to high for 3 minutes to fully harden the
hotplate coating.
BAD
BAD
BAD BAD
(no utensil)
(no utensil)