Cleaning The Cooker - Chef cooking CFE532WA User Manual

cleaning the cooker

Oven
• Do not remove the oven door
WARNING
• Make sure oven knobs are in the off position
• C lean immediately after use as a warm oven is easier to clean
• U se detergent, hot water (and household ammonia/
cloudy ammonia if necessary) and a soft cloth. Dry thoroughly.
• R emove shelves when cleaning oven
• I f there is a build-up of grease, place a small oven proof
dish containing ¼ cup (62mL) household ammonia/cloudy
ammonia and ¾ cup (187mL) water in the oven. Heat
oven to 110 degrees and turn oven off when 110 degrees
is reached. Leave over-night. The fumes will loosen stubborn
grease and stains. Remove bowl, wash with hot, soapy
water and dry well before closing oven door again.
Oven Shelves
• C hrome shelves: use detergent and hot water. If very
dirty use a non-abrasive nylon scourer
• E namel dishes and tray: use detergent and hot water.
If very dirty a non-abrasive nylon scourer
• D O NOT clean oven parts with abrasive or
caustic-type cleaners.
Oven – Grill Dish and Insert
• A fter every use, and while still warm, sprinkle grill insert
with detergent and cover with wet paper towel as this will
loosen food particles and grease
• W ash pan and grid with hot, soapy water with a little
household ammonia/cloudy ammonia added. Rinse and
dry before replacing in position.
Ceramic Hotplates
• C lean with detergent and hot water and polish with
a soft cloth
• For harder to clean spills a blade scraper is supplied
• A luminium foil, plastic and high sugar content food can
cause pitting if not removed before the hotplate has cooled.
Solid Hotplates
• S olid hotplates are fitted with stainless steel trim rings,
which after initial use, change colour to light brown.
This is a normal characteristic of stainless steel and will
not affect the operation or performance of your hotplates
• C lean off any spillage after hot plate has cooled down
• A t regular intervals, clean hotplate with a nylon scouring
pad and soapy water. Wipe clean then warm hotplate
for 30 seconds to dry the surface
• A pply 'hot plate protector''. Set hotplate on high for 3
minutes to allow coating to harden.
Gas Burners
• F lame port blockages should be removed with a small
metal cake skewer or nylon brush.
• C lean dirty spark plugs very gently with a nylon scourer.
DO NOT use steel wool. DO NOT bend spark plug as
it may break.
Chef 540 Upright Cooker CLEANING THE COOKER 11