HP StorageWorks DAT 72 Quickspecs page 15

QuickSpecs
Technical Specifications
Power Requirement (Tape Module) 100-240V, 2.0A max, 50-60Hz, using Tape Array 5300
Power Consumption
Termination
© Copyright 2003 Hewlett-Packard Development Company, L.P.
The information contained herein is subject to change without notice.
Microsoft and Windows NT are US registered trademarks of Microsoft Corporation.
The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein
should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors or omissions contained herein.
DA-11597 World Wide — Version 3 — June 17, 2003
Minimum 3.4W (idle)
Typical 7.1W
Maximum 22.5W (load) for <1 sec
No terminator is required for internal model (assumes use of terminated cable). The external model requires
termination (terminator included with product)
HP StorageWorks DAT 72 Tape Drive
15