Acura 2006 MDX Owner's Manual page 267

Changing a Flat Tire
Slowly turn the wheel nut wrench
22.
clockwise to take up the slack of
the hoist cable. Make sure the
bracket is seated in the center
hole of the spare tire.
23. Turn the wheel nut wrench
clockwise until the flat tire rests
against the underbody of the
vehicle and you hear the hoist
click.
266
Always raise the spare tire hoist, even
if you are not stowing a tire. If the
hoist is lef t down, it will be damaged
during driving and need to be replaced.
Store the jack in its holder. Turn
24.
the jack's end bracket to lock it in
place. Store the tools, and install
the cover.
25. Turn off VSA (see page
26. Refer to Changing a Tire with
TPMS (see page 208
Loose items can fly around the
interior in a crash and could
seriously injure the occupants.
Store the wheel, jack, and tools
securely before driving.
214 ).
).