Acura 2006 MDX Owner's Manual page 121

Playing the XM Satellite Radio (U.S. Models)
The SCAN function gives
SCAN
you a sampling of all channels while
in the channel mode. In the category
mode, only the stations within that
category are scanned. To activate
SCAN, press the SCAN button or
touch the SCAN icon on the audio
display (models with navigation
system). The system plays each
channel in numerical order for a few
seconds, then selects the next
channel. When you hear a channel
you want to continue listening to,
press the button or touch the icon
again.
120
Preset You can store up to 12
preset channels using the six preset
buttons or preset icons (on models
with navigation system). Each button
stores one channel from the XM1
band and one channel from the XM2
band.
To store a channel:
1. Press the XM button. Either XM1
or XM2 will show in the display.
2. Use the TUNE knob, or the
CATEGORY or SCAN buttons to
tune to a desired channel.
In the category mode, only channels
within that category can be selected.
In the channel mode, all channels
can be selected.
Pick the preset button (icon) you
3.
want for that channel. Press and
hold the button (icon) until you
hear a beep.
4. Repeat steps 2 and 3 to store the
first six channels.
5. Press the XM button again. The
other XM band will show. Store
the next six channels using steps 2
and 3.
Once a channel is stored, simply
press and release the proper preset
button (icon) to tune to it.
The presets will be lost if your
vehicle's battery goes dead, is
disconnected, or the radio fuse is
removed.