Acura 2006 MDX Owner's Manual page 166

To lock or unlock the HFL, do this:
1. Press and release the top of the
TALK/BACK button. After the
beep, say ''Security.'' The HFL
response is ''Security options are
lock, unlock, and set passcode.''
2. Press and release the top of the
TALK/BACK button. After the
beep, say ''Lock'' or ''Unlock.''
Lock means the HFL will prompt
you for your passcode each time
the ignition switch is turned to the
ON (II) position and you press the
Talk button. You will only be
asked for the passcode once per
ignition cycle. If the HFL is locked,
its response is ''System is locked.
Each time the vehicle is turned on,
the passcode will be required to
use the system.'' If the HFL is
unlocked, its response is ''The
system is unlocked. Returning to
the main menu.''
Setting Up the System
The voice of the HFL can be set to
male or female (U.S. models only).
Also, the incoming notification can
be set to a ring tone, a prompt, or no
notification.
To set up the system, do this:
1. Press and release the top of the
TALK/BACK button. After the
beep, say ''System.'' The HFL
response is, ''System options are
setup and clear.''
2. Press and release the top of the
TALK/BACK button. After the
beep, say ''Setup.'' The HFL
response is ''Would you like male
or female prompts?''
3. Press and release the top of the
TALK/BACK button. After the
beep, say ''Male'' or ''Female,''
depending on the system voice
you want. The HFL response is,
''Male (Female) prompts have
HandsFreeLink
been selected. Would you like an
audible notification of an incoming
call?''
4. Press and release the top of the
TALK/BACK button. If you say
''Yes'' after the beep, the HFL
response is, ''Would you like a ring
tone or a prompt?'' If you say ''No''
after the beep, the HFL returns to
its main menu. Saying ''No'' will
result in no ring tone or prompt
playback during an incoming call.
The audio system will still mute,
and a message will be displayed.
5. Press and release the top of the
TALK/BACK button. After the
beep, say ''Ring tone'' or ''Prompt.''
If you choose ''Ring tone'' you will
hear a ring tone through the audio
speakers to announce an incoming
call. If you choose ''Prompt,'' you
will hear this message to
announce an incoming call: ''You
have an incoming call.''
TM
165